how to fix a burnt vape

Quick Fixes for a Burnt Vape Taste

Written by: Alyx Zhang

|

undefined

|

Time to read 5 min

Introduction


Experiencing a burnt taste from your vape device can be frustrating. It disrupts your session and leaves an unpleasant aftertaste. Understanding why this happens and knowing how to fix a burnt vape can transform your vaping experience. 


Today, we’ll walk you through the common causes and quick fixes to get you back to enjoying smooth, flavourful hits. Know some practical solutions that will help you resolve this issue effectively.

What do Burnt Vapes Taste Like?

A burnt taste in your vape can be a major turn-off. This unpleasant flavor usually results from a few common issues, mainly: 

Dry Hits

The taste is often harsh and acrid, resembling burnt cotton or charred food. When your e-liquid runs low, the vape coil wick can dry. This means it's not soaking up enough liquid, causing the coil to overheat and burn the wick material. 

Coil Issues

Overused or damaged coils can also lead to a burnt taste. Coils need to be replaced periodically because they wear out over time. A worn-out coil might not vaporize the e-liquid properly, leading to a burnt flavour.

Improper Wattage Settings

Using a wattage setting that is too high for your coil can also cause a burnt taste. When the wattage is too high, the coil heats up too quickly, burning the e-liquid before it has a chance to vaporize smoothly. This can result in a taste that's similar to burnt rubber or plastic.

How to Get Rid of Burnt Vape Taste?

Here’s how to fix the burnt vape taste: 

Prime the Coil

Always prime a new coil before use. This involves saturating the coil with e-liquid and letting it sit for a few minutes. This helps ensure that the wick is fully soaked and prevents dry hits.

Adjust Wattage Settings

Check your wattage settings. If they're too high, lower them to match the recommended range for your coil. This helps prevent the coil from overheating and burning the e-liquid.

Change the E-Liquid

Sometimes, the burnt taste can be due to the type or flavour of the e-liquid. If you're using a thick or high VG liquid, it may not be wicking properly. Try switching to a thinner e-liquid or one with a different VG/PG ratio.

Replace the Coil

If the burnt taste persists, your coil might be worn out. Replace it with a new one. Regularly replacing coils can prevent the burnt taste and ensure a smooth vaping experience.

Clean the Device

Regular cleaning of your vape device is essential. Disassemble the tank and clean it with warm water. Make sure to let all parts dry completely before reassembling.

Maintain Your Vape 

Perform regular maintenance to keep your device in good working order. Check for leaks or issues with the tank and ensure all parts are functioning correctly.

How to Make a Burnt Vape Taste Better

If you’re stuck with a burnt vape taste and need a temporary fix, here are some practical solutions:

  1. Switch E-Liquid Flavors: A burnt taste can sometimes linger even after you’ve addressed the main issues. Try using a different e-liquid flavor. A fresh, new flavor can mask or balance out the burnt taste and provide a more enjoyable vaping experience.
  2. Adjust Airflow Settings: If your vape device has adjustable airflow, try tweaking it. Increasing the airflow can help cool the coil and reduce the intensity of the burnt taste. Experiment with different settings to find the balance that improves the flavor.
  3. Try a Different VG/PG Ratio: If your e-liquid has a high VG (vegetable glycerin) content, it may not wick as effectively. Switching to a liquid with a higher PG (propylene glycol) content can help improve the taste and vaping performance.
  4. Use a Flavor Enhancer: Some vapers use flavor enhancers or boosters to adjust and enhance the taste of their e-liquids. These can sometimes help mask unpleasant flavors and add a more pleasing note to your vape.
  5. Give the Coil a Break: If possible, let your vape device rest for a while. Sometimes, allowing the coil to cool down can temporarily improve the taste.
  6. Check for Residual E-Liquid: If you’ve recently changed flavors or cleaned your tank, make sure there’s no residual old e-liquid left behind. Residue can affect the taste. A quick rinse of your tank might help.

How Do I Stop a Vape from Tasting Burnt?


Adopting best practices for device maintenance and proper use is essential to prevent your vape from tasting burnt. Here are some key tips:

Regular Cleaning

Clean your vape device regularly. 

  • Disassemble the tank and rinse it with warm water.
  • Remove any old e-liquid residue and let all parts dry completely before reassembling. 

Proper Coil Care

Always prime your coils before use. 

  • Saturate the coil with e-liquid and let it sit for a few minutes to ensure the wick is fully soaked.
  • Replace coils regularly to avoid degradation that leads to a burnt taste.

Use the Right E-Liquid

Choose e-liquids with an appropriate VG/PG ratio for your device. 

  • High VG liquids are thicker and may not wick as efficiently in lower-wattage devices
  • Opt for a balanced VG/PG ratio to match your vape’s specifications.

Adjust Device Settings

Ensure your wattage settings are compatible with your coil’s recommended range. Setting the wattage too high can cause overheating and burnt flavours. Always follow the manufacturer’s guidelines for your coil and device.

Avoid Overuse

Don’t let your tank run dry. Always keep an eye on the e-liquid level and refill it before it gets too low. Dry hits are a common cause of burnt tastes.

Proper Storage 

Proper storage of your vape device and e-liquid is essential. E-liquids should be kept in a cool, dark place to prevent degrading, which can affect flavour quality.

No More Burnt Vape Taste


Experiencing a burnt taste in your vape can be frustrating, but understanding how to prevent and address it can greatly enhance your vaping experience. Regular maintenance is crucial—make sure to clean your device frequently, prime your coils properly, and replace them as needed. Adjust your wattage settings to match your coil’s specifications, and choose e-liquids with the right VG/PG ratio for your device. 


If you encounter a burnt taste, try switching e-liquid flavours or tweaking your airflow settings as temporary fixes. By following these best practices and staying informed about your device’s requirements, you can avoid burnt tastes and enjoy smoother, more flavourful hits. For a superior vaping experience, consider exploring the latest products from RELX.

Notice! We have found that you have already participated in Referral activities, and repeated participation in the activities will not be rewarded
Got it (5s)
Shopping Cart
 
Coupons available now,Check out to Use

Total

CAD $0.00
Your cart is empty!
Continue Shopping
RelxNow PWA
Add to device brings a smooth experience, - After you relogin from PWA, you will be given a free pod.

Step 1
Click the “Add Home Screen” menu.
Step 2
Click the “Add to Home Screen” from the menu list.
Step 3
Click the button of “Add”.
Step 4
After the installation is complete, you will see this icon on your desktop.
RelxNow PWA
Download

Add to device brings a smooth experience, - After you relogin from PWA, you will be given a free pod.
RelxNow PWA
Didn't work? Click here 👉

A free pod coupon will be sent to your Coupon list after you log in
Tips
If your Chrome cannot add Relxnow to the desktop, please follow the steps below to set up and try again.
Step 1: Open the system settings, find Chrome browser in the application settings list;
Step 4: Refresh the page and re-add.
* If still unsuccessful, please use your system browser to open and try again.
OK, Got it